Timesert Tap Guides

TAP GUIDES INSURE THAT THREADS ARE SQUARE TO SURFACE.

The lower portion of the tap guide should remain as square as possible to the engine surface.
Turn the tap slowly while making sure the guide remains flush.

TAP GUIDES

METRIC SIZE		PART NO.
M5x0.8		35086
M6x1.0		36105
M7x1.0		37105
M8x1.25		38125
M9x1.25		39125
M10x1.0		30105
M10x1.25		30125
M10x1.5		30155
M11x1.25		31125
M11x1.5		31155
M12x1.25		32125
M12x1.5		32155
M12x1.75		32175
M13x1.5		33155
M14x1.5		34155
M14x2.0		34255
M16x1.5		36155
M16x2.0		36205
M18x1.5		38155
M20x1.5		30215
M22x1.5		32255
M24x1.5		32455

INCH SIZE		PART NO.
1/4-20		31420
1/4-28		31420
5/16-18		35168
5/16-24		35168
3/8-16		33816
3/8-24		33824
7/16-14		37164
7/16-20		37162
1/2-13		31213
1/2-20		31225
5/8-18		25885
3/4-10		33415
3/4-16		33416

For Use in Restricted Areas
Ideal for use in areas where a T handle won't fit. Set of 8 sockets fits all number and fractional M.C.T.I. standard taps thru 1/2". A lso fits 1/8" NPT taps and metric taps thru 12mm manufactured to M.C.T.I. standards. Sockets contained on a vinyl holder.

Time-Sert taps 4mm to 12mm metric / 4-40 to 1/2 inch.
Sockets #1 thru #4 use 1/4 drive,
rest use 3/8 drive.

Three Larger Sizes in a Convenient Set
The three largest tap sockets, are now packaged in a three piece set. Ideal for use where a T handle won't fit, especially in restricted areas. For larger, fractional M.C.T.I. standard taps. #9 socket is 5/8" (16mm), #10 is for 11/16" (18mm) and #11 is for 3/4". Sockets contained in a vinyl holder.

Time-Sert taps 13mm to 16mm metric / 5/8 to 3/4 inch.
use 1/2 drive socket.

Enables You To See A round Corners
2 1/4" diameter mirror swivels to any position. Length extends from 10" to 14". Has an insulated vinyl grip.


STRAIGHT TAP WRENCH Straight Tap Wrench, Length 5 Inches, Hand Taps Capacity 1/16 to 1/4 Inch, Taps M1.5 to M6 wrench number 00 P/N C67201	T-HANDLE WRENCH T- handle wrench, Length 2-3/4 Hand Taps Capacity 1/16” to 1/4” Inch Taps M1.5 to M6 wrench number T11 P/N C67208 Time-Sert taps M3 - M5
Straight Tap Wrench, Length 11 Inches, Hand Taps Capacity 5/32 to 1/2 Inch, Taps M4 to M12 wrench number 5 P/N C67202 Time-Sert taps 4-40 - 7/16 Inch, M3 - M11 Metric	T- handle wrench, Length 3-5/8 Hand Taps Capacity 7/32” to 1/2” Inch Taps M5 to M12 wrench number T12 P/N C67209 Time-Sert taps M5 - M11
Straight Tap Wrench, Length 15 Inches, Hand Taps Capacity 5/32 to 3/4 Inch, Taps M4 to M19 wrench number 6 P/N C67203 Time-Sert taps 1/4 - 9/16 Inch, M5 - M14 Metric
Straight Tap Wrench, Length 19 Inches, Hand Taps Capacity 1/4 to 1-1/8 Inch, Taps M12 to M28 wrench number 7 P/N C67204
Straight Tap Wrench, Length 40 Inches, Hand Taps Capacity 3/4 to 1-5/8 Inch, Taps M19 to M40 wrench number 8 P/N C67205
Removes broken bolts 5/8 to 7/8. If removing a Time-Sert insert, this tool will remove inserts from 1/2 to 9/16 inch or 12mm to 14mm metric.	Made from hardened tempered alloy steel. Use when a screw or bolt has broken off while still in the fastening hole. 5 pc set 3/32 to 5/8 If removing a Time-Sert insert, this set will remove inserts from 4-40 to 7/16 inch or 4mm to 11mm metric.

Removes broken bolts 7/8 to 1-1/8. If removing a Time-Sert insert, this tool will remove inserts from 5/8 to 3/4 inch or 16mm to 20mm metric.	Removes broken bolts 1-1/8 to 1-3/8. If removing a Time-Sert insert, this tool will remove our 3/4 pipe insert.
Time Fastener does not sell this tool! Rotunda Sparkplug Puller Tool. This tool is used to remove separated or broken spark plug casing on the Ford 3 valve spark plug M16x1.5. LINK: SPX Spark plug removal tool 303-1203 Link: Read more info. on Ford forums #21 on page

Gary Olsen

http://www.airportautomotive.com/

We bought the i Scan from Paul in 2013. We do more Asian and American cars, not so many Europeans. The i Scan is strongest on Euro cars and it does well on the Asians. We have been very happy using the J2534 features through it. We run Toyota's factory Techstream lite, Gm's ACDelco site allows us to use their factory … read more

Timesert Tap Guides

Testimonials